skip to Main Content
+45 9725 1516 info@scanhugger.com Become a dealer

EU 4000 INDUSTRIAL HAMMERMILL

The Scanhugger EU 4000 Hammermill is highly suitable for grinding coarse chips of solid wood, particleboard, and MDF into a predefined particle size ranging from 6 – 15 mm. Depending on the material you need processed and the particle size of the final product, the hammermill can be mounted with different screen and hammer combinations to fit your requirements.

TECHNICAL DATA

Rotor RPM:3000
Main motor:45 – 75 kW
Chip length:6 – 15 mm
Capacity:3000 – 4200 kg/h
Product inquiry
Scanhugger EU 4000 Hammermill also known as a pulverizer grinding coarse chips of solid wood, particleboard, and MDF into a predefined particle size.

Grinding wood into smaller particles

The Hammermill for shredding wood with a bottom outlet, and with inlet in the top of the grinding chamber is used in connection with sub-bin, or mechanical transport of the milled product. The Hammer mill is used for grinding pre-shredded wood into finer material. The grinding fineness of the product is determined by the hole size of the screen.

The material is reduced when it passes between the hammers and the grinding bridge. The rotor is mounted with 8 mm swing hammers and produces up to 4200 kg/h milled wood ranging from 6 – 15 mm. The hammers can be turned using the 4 corners for prolonged hammering. The hammer mill delivers consistently high capacities and is ideal for dry wood grinding, generating valuable wood products for the particleboard industry and other wood composite markets, pellet production, briquetting, and boiler fuels.

When servicing is required, our hammer mills are highly accessible. Design as a clamshell, where the top let can be flipped open, gives easy access to the screens and hammers. This ensures the fast and easy access to all machinery parts and keeps any unnecessary downtime to the absolute minimum.

The Hammermill is used as an integrated part of a wood waste reduction line or a stand-alone installation. The Scanhugger line-up, coupled with a full range of options and auxiliary equipment enables us to build turnkey wood waste utilization systems. The range of Scanhugger auxiliary equipment includes pneumatic discharge systems, chip conveyor and auger discharge systems, metal detection and separation systems.

View of the Scanhugger hammer mill opened up for inception before a life of grinding wood waste into pellets and briquitting
LOW MAINTENANCE, HIGH RELIABILITY

The hammer mill, also known as a pulverizer, works according to the principle of impact grinding. Its core consists of a rotor with non-wearing impact hammers and external rolling bearing housing. The Scanhugger Hammermill is highly suitable for grinding coarse chips of solid wood, particleboard, and MDF into a predefined particle size ranging from 6 – 15 mm. Depending on the material you need processed and the particle size of the final product, the hammermill can be mounted with different screen and hammer combinations to fit your requirements.

ROBUST SWINGHAMMERS

The material is reduced when it passes between the hammers and the grinding bridge. The rotor is mounted with 8 mm swinghammers. The hammers can be turned using the 4 corners for prolounged hammering. The hammer mill deliver consistently high capacities and are ideal for dry wood grinding, generating valuable wood products for the particle board industry and other wood composite markets, pellet production, briquetting, and boiler fuels.

View of the small Scanhugger hammer mill with hammers ready for making a product for pellets and briquitting
Shredded wood from a Scanhugger with high quality
TURNING CHIPS INTO DUST

The screen is a solid steel plate perforated with round holes for optimal output quality. The hole size range from 6 – 15 mm. pending the requirements. We use a highly-robust, low wear grinder and milling segments for extra durability. The design of the rotation of the hammer mill gives an even wear on the screens and milling segments, which further adds to a reduced maintenance and service requirements.

ENGINEERED FOR DAY IN, DAY OUT PERFORMANCE

When servicing is required, our hammer mills are highly accessible. Design as a clamshell, where the top let can be flipped open, gives easy access to the screens and hammers. This ensures the fast and easy access to all machinery parts and keeps any unnecessary downtime to the absolute minimum. The low costs are further supported by the highly robust, wear-resistant properties of the grinders and the tested underlying technology.

View of the Scanhugger hammer mill with internal view ready for making pellets and briquitting
Hammermill installed at costumer with buffer silo feeding shredded wood material.
TURNKEY WOOD WASTE UTILIZATION SYSTEM

The Hammermill is used as an integrated part of a wood waste reduction line or a stand-alone installation. The Scanhugger line-up, coupled with a full range of options and auxiliary equipment enables us to build turnkey wood waste utilization systems. The range of Scanhugger auxiliary equipment includes pneumatic discharge systems, chip conveyor and auger discharge systems, metal detection and separation solutions ensure the removal of all ferrous particles before further processing.

EU 4000 HAMMERMILL APPLICATIONS

  • Pre-shredded solid wood
  • Particleboard
  • MDF

TECHNICAL SPECIFICATIONS

Side view of a hammer mill with technical material
A860
B1067
E2000
F450
G702
H200 x 505
JØ 300

Dimensions in mm

Infeed opening:400 x 205 mm
No. of hammers:92 / 8 mm
Main motor: 45 – 75 kW
Rotor RPM:3000
Particle size:6 – 15 mm
Capacity:3000 – 4200 kh/h
Weight:1350 kg

CONTACT US

Back To Top