PM 1400 SV SYSTEM- THE EFFECTIVE PACKAGE SHORTNER
The Scanhugger type PS1400 SV stationary package shortening system is built for trimming and length shortening of packages. Max. package size 1.2 x 1.2 m x 7.2 m with Scanhugger package shortening saw, type PM 1400, with 7.5 kW main motor, 1400 mm bar, 0.25 kW motor for variable feed, as saw unit. The sword is angled, rising 80 mm relative to the horizontal.
|Saw cycles:||2 – 3 min.|
|Main motor:||7,5 kW|
|Cutting wide:||1400 mm|
|Cutting height:||1400 mm|
Trimming and length shortening of wood packages
Type PS1400 SV with stationary package shortening saw. The package shortening system built for trimming and length shortening of packages with max. package size 1.2 x 1.2 m x 7.2 m with Scanhugger package shortening saw, type PM 1400, with 7.5 kW main motor, 1400 mm bar, 0.25 kW motor for variable feed, as saw unit. The sword is angled, rising 80 mm relative to the horizontal.
The package to be shortened is placed with a forklift on joists that have already been laid out on the stand, the package is straightened by the forklift pulling the package against the supports shown. The operator moves the saw unit to the front of the package for trimming. The subsequent cuts are made by the operator on the control panel selecting the desired lengths, after which the saw runs in position with a positioning accuracy of less than 1.5 mm, and the saw movement is performed. After the last programmed cut, the saw automatically returns to the starting position.
The waste from the sawing can be collected in a container that is placed under the saw or a transport system for the waste can be built-in.
PM 1400 SV APPLICATIONS
- Fast, effective & precise cutting
- Packed wood cut to the desired size
- Reliable and easy maintenance system
- Cuts at a perfect 90-degree angle.
|Infeed height/width:||1400 x 1400 mm|
|No. of saws:||1|
|Saw cycle||2 – 3 min.|
|Infeed speed:||6 – 12 m/min.|
|Saw motor:||7,5 kW|
|Cutting length:||1400 mm|