skip to Main Content
+45 9725 1516 info@scanhugger.com Become a dealer

HT 30/25/2

The Scanhugger HT 30/25/2 is the smallest horizontally feed chipper in the line. It is ideally suited for cutting rib edgings and off-cuts to a precise chip from a single line rip. The chipper can be placed in the factory at the source of waste operating in-line with a straight- or gang rib saw, it continuously reduces the waste produced and eliminates the handling of slabs and edgings.

TECHNICAL DATA

Rotor speed:1100 RPM
Main motor:15 – 18,5 kW
Chip length:10 mm
Capacity:300 – 650 kg/hour
Product inquiry
Scanhugger wood chipper front view

Reliable horizontal shredder for rib edgings and off-cuts

The HT 30/25/2 horizontally feed single-shaft shredder has the size and output fitting the requirements of most in-house production companies. The shredder is therefore especially compact, reliable and very energy efficient. The tested design and thus low maintenance technology enable you to efficiently recycle your residual timber.

The wood shredder’s reliability comes from its sturdy steel construction and its proven technology. The system monitors and eliminates overloading of the main motor, thereby maximizing the cutting action and the output of the wood chips. The system builds on very few moving parts and therefore further reduces future maintenance costs.

In addition, the HT 30/25/2 features a mechanism that detects foreign objects and automatically shuts down the wood shredder. This prevents damage to the cutting unit. Energy efficiency plays a big role in the HT 30/25/2. The unique knife design can easily shred rib edgings and off-cuts and only requires a drive capacity of 15 kW. The HT 30/25/2 produces a high-quality granulate of 10 mm that is well suited for thermal utilization or briquetting.

We offer turnkey solutions with high customizability. Each of our wood shredders is customized to your needs. The machines can be equipped with a metal separator, a vibratory infeed conveyor system or a customized hopper or combined with other machines for further refinement of the granulate. We produce special sound isolation housings which makes it possible for the machine to be placed directly in-line the woodworking machine for the processing of MDF and solid wood. This optimizes the sound environment and minimizes waste wood transportation.

Scanhugger HT knife
PRECISE ROTOR AND KNIFE DESIGN

The rotor is a solid steel drum, precision machined to obtain the requested chip size and quality. The straight knives are mounted with a special wedge system that while utilizing the flywheel effect of the rotor, lock and secure the knives.

Counter knife

The counter knife support is divided into 2 parts; a stationary support locked in place, and a removable part to which the actual counter knife is mounted to. This construction forms a precision seat for the counter knife and allows for easy removal of the counter knife.

Scanhugger HT quality counter knife steel
Scanhugger heavy in-feed roller with vibration conveyor in front
INFEED ROLLERS

Machined and surface hardened “pineapple style” infeed rollers stop when the rotor reaches its maximum load. As the load decreases, the feed works starts up again. This start/stop sequence eliminates overloads of the rotor.

RUGGED MAIN FRAME

The rugged, heavy duty main frame and rotor along with the chrome nickel shaft and oversized roller bearings are engineered to accommodate the heavy shock loads typical of drum chippers.

Scanhugger HT wood chipper rugged main frame

HT 30/25/2 APPLICATIONS

    • Hard- and softwood
    • Rib edgings
    • Slabs
    • MDF
    • Lineal plastic scrap
    • Any long wood scrap
    • And much more.

TECHNICAL SPECIFICATIONS

HT 30-25-2 3D technical drawing
Infeed height/width:60 x 300 mm
Rotor diameter:Ø 250 mm
No. of knifes: 2
Rotor speed:1100
Infeed speed:16 m / min.
Rotor speed:85 RPM
Main motor:15 – 18,5 kW
Screen perforation:25 mm
Chip length:10 mm
Capacity:300 – 650 kg/hour
Weight:550 kg

CONTACT US

Back To Top