skip to Main Content
+45 9725 1516 info@scanhugger.com Become a dealer

HK 35/10 Wood chopping Guillotine

Scanhugger HK-Guillotine is designed to chop wood waste without the attendance of an operator. With a small footprint and low operation noise, makes it ideally suited for locating in the factory right at the source of the waste. Operating inline with a gang saw, a straight-line rip saw or panel saw. Using a closed-looped hydraulic system, the knife is continuously cycling for optimal output. The cut length is set by an adjustable gate.

TECHNICAL DATA

Knife cycles:15 – 25 pr. min.
Main motor:4 – 11 kW
Cutting length:100 – 300 mm
Infeed height:330 x 80 mm
Product inquiry
wood chopping Guillotine from Scanhugger made for wood cutting wood turnkey system

CUTTING LOGS DOWN TO MANAGEABLE PIECES

Scanhuggers wood scrap guillotines are designed for cutting long pieces of solid wood, particleboard, and MDF to shorter pieces. The Guillotine is ideally suited for locating in the factory right at the source of the waste. Operating inline with a gang saw, a straight-line rip saw or panel saw. Using a closed-looped hydraulic system, the knife is continuously cycling. The cut length is set by an adjustable gate.

Using a closed-looped hydraulic system, the knife is continuously cycling. The cycle time is depending on the hydraulic unit and the knife cylinder size. When the knife is at the top position it pauses before the down movement. When the PLC-system registers a heavy load on the down movement, it will return to the top position and start a new cycle. When the knife moves up the hold-down plate releases the material allowing it to move forward. The length moves down at the same time and stops the material when it reaches the set length. When the knife moves down the hold-down plate compresses the material and the length adjustment lifts and releases the chopped material.

We produce and tailor fit a large range of machinery related to separation, conveying and handling infeed and chip discharge to and from the production line. Our metal separation solutions ensure the removal of all ferrous particles before further processing.

HK 35/10 APPLICATIONS

    • Cutting logs into predefined sizes
    • Chopping rib edgings from solid wood
    • Particale board
    • MDF.

TECHNICAL SPECIFICATIONS

stencil of wood chopping Guillotine from Scanhugger made for wood cutting wood turnkey system
Infeed height/width:330 x 80 mm
No. of knifes:1
No. of counterknifes: 1
Knife cycles15 – 25 per min.
Infeed speed:6 – 12 m/min.
Hydraulic motor:4 – 11 kW
Cutting length:100 – 300 mm
Capacity:3 – 5 cbm/hour
Weight:750 kg
Sound level:78.5 dB

CONTACT US

Back To Top